Name: Multi-directional Forklift
Model: C4000
Year of Manufacture: 2024 (based on nameplate)
Serial Number: 91053 (based on nameplate)
Manufacturer: Combilift ULC, Ireland
Operating Hour Meter: 143 (read)
Engine Manufacturer/Model: KUBOTA WG2503-L-ET 2.5L Serial Number
7RQ5316 (based on nameplate)
Nominal power (kW) 42
Fuel type LPG
Hydrostatic drive
Load center of gravity (mm) 600
Maximum lifting capacity (kg) 4000
Maximum lifting height (mm) 6000
Own weight (kg) 6100
Height with cab (mm) 2435
Transport dimensions L/W/H (mm) 2300/2190/2855
Maximum travel speed (km/h) 15
Gradeability 15%
Front tires 200 / 50-10 Solideal Magnum
Rear tire 27 x 10-12 Solideal Magnum
Color green/gray
Main equipment:
Full, lockable operator's cab.
Warning light.
4 work lights.
Fork carriage, 120x15 cm pallet forks (based on measurements during visual inspection, no nameplate or manufacturer's markings).
LPG gas cylinder.
Technical condition description.
The overall technical visual condition was good.
The inspection was conducted at the post-lease equipment yard.
▪ The forklift was started and a test run was performed with the work attachments, without load.
The test concluded:
1. Engine – operating properly within the tested speed range, no visible leaks or operating fluids were found in the engine compartment.
3. Braking system – operating properly.
4. Steering system – operating properly.
5. The operation of the boom and mast assembly was checked within the range of mast movement at maximum height – no functional irregularities were found.
6. Hydraulic system: no operational irregularities were found within the tested range, no visible leaks or leaks were found. ▪ Visible operational contamination, scratches and abrasions on the surface, paintwork chips, rust deposits.
Broken windshield.
Front tires: 200/50-10 Solideal Magnum, tread depth: 10.5 mm (based on measurements during visual inspection).
Rear tire: 27 x 10-12 Solideal Magnum, tread depth: 24 mm (based on measurements during visual inspection).
▪ Operator's cab.
Operational contamination was found inside the cab.
Controls and indicators were visually complete, with no visible mechanical damage.
▪ UDT inspection valid until January 2027 – as indicated by the sticker on the operator's cab, no UDT documentation. ▪ Technical documentation provided: none (no user manual, spare parts catalog, CE Declaration of Conformity, or inspection book).
CE marking: Yes.
▪ Number of ignition keys (pcs): 1.
▪ No information on inspections, repairs, or operating conditions.
▪ The forklift does not have a service report. Before further use, it requires necessary repairs, maintenance, and service to check the functionality and wear of components and to detect any possible component faults. |
