General data:
Brand, model: WACKER NEUSON ET18 (E12-02)
Type of equipment: Mini crawler excavator
Serial number: WNCE1202CPAL04066
Year of manufacture: 2018
Mileage: 4088 hours
Technical data of the valuation item:
Operating weight: 2,117 kg
Transport weight: 1,582 kg
Travel speed: 2.5 – 4.3 km/h
Digging force – arm / bucket: 11,200 / 18,800 N
Slewing speed: 10 rpm
Engine:
Model: YANMAR 3TNV76
ISO engine power: 13.8 kW / 2,200 rpm
Type: diesel
Displacement: 1,116 cm³
Number of cylinders: 3
Undercarriage:
Track width: 230 mm
Total machine width: 990 – 1,300 mm (hydraulically adjustable)
Hydraulic system:
Pump capacity: 73 l/min
Working pressure: 200 bar
Tank capacity: 19 l
System capacity: 33 l
Dimensions:
Total length: 3,854 mm
Total width: 990 mm - 1,300 mm
Total height: 2,392 mm (with cab)
Ground clearance: 210 mm
Equipment:
- VDS system (cab tilt up to 15°)
- Rubber tracks,
- Folding blade,
- Full cab with heating,
- Radio-ready,
- Additional hydraulic outlet on the arm,
- Digging bucket approx. 500 mm wide, no teeth,
- Quick coupler.
Technical Condition Description
Nameplate:
- Location – front frame.
- Tampering/irregularities – partially torn, bent.
Identification Number:
- Location – not located.
Technical Documentation:
- Owner's Manual – none,
- Parts Catalog – none,
- Technical Specifications – none
CE/EC Certificate:
- Marking – yes,
- Declaration/Certificate of Conformity – none.
Operation History:
- Service Documentation – Inspection Booklet – none.
- Periodic Inspection Markings – YES – WACEKR NEUSON sticker dated
January 16, 2020, with 1190 km/h, marking on the inside of the engine cover – "14.08.2024 OIL + FILTERS", on-board computer reading – 388 km/h until the next service interval. Year of manufacture:
- 2018 - determined based on permanently marked markings on the factory nameplate.
Technical condition:
- Visual condition - satisfactory,
- Wear - directly proportional to age and mileage.
- Engine started, engine operation within the tested range is correct. Air filter housing shows signs of temporary repairs - left mounting bracket missing.
- Running gear - no visible defects, running gear test performed without load - no irregularities found. Tracks with minor cracks and material loss. Track bogie frame significantly scratched with corrosion.
- Working gear - working gear test performed without load - no irregularities found, play consistent with mileage. Arm scratched with chips and corrosion. Paint damage on actuators. - Damaged machine parts requiring repair/replacement:
Body:
- outer frame – scratched, chipped, corrosion spots,
- lower left cover – dents, chipped, corrosion spots,
- counterweight – scratched, chipped,
- engine compartment cover – scratched, dents, soundproofing with defects,
- lower windshield – temporary,
- radio antenna – torn from its mountings, incomplete,
- cab side covers – chipped, scratched,
- windshield frame – corrosion spots. Cabin:
- Fan vents – broken and missing,
- Door lock cover – broken,
- Windshield and upper window opening mechanism – with signs of repair (welds), missing pin on the left side,
- Left joystick – missing outer part of the upper button,
- Right joystick – missing outer part of the lower button.
Missing:
- Arm work lamp,
- Radio antenna mast,
- Arm hydraulic cylinder cover,
- Exterior mirrors with arms,
- Rear cab work lamp.
Other:
Number of keys – 1 pc. |
