Technical data
General data:
Brand, model: PÖTTINGER NOVADISC 302
Technical device type: Disc mower
Serial number: 37430001877
Year of manufacture: 2022
Mileage: No odometer
Technical data of the item:
Item Value / range
Type Rear disc mower, without conditioner
Working width 3.04 m
Number of discs / blades 7 discs / 14 blades
PTO speed (standard) 540 rpm
PTO – 1000 rpm possible
The scale "540 / 1000 rpm" is visible on the viewed item
when the drive is set
Power requirement approx. 44 kW (≈60 HP)
Theoretical capacity approx. 3.0 ha/h
Three-point hitch category Cat. II / width 2
Transport height approx. 3.4 m (catalog versions)
Swath width up to approx. 2.3 m
Catalog weight approx. 715 kg (depending on equipment)
Name plate weight 800 kg
Mechanical break-back protection
Beam relief /
Spring-assisted copying, adjustable force
Drive: Gearbox + V-belts for cutter bar
Welded, flat cutter bar, quick knife change
Equipment:
• Parking stand,
• Drive head marked 540/1000 rpm,
• Hydraulic system (lifting/transport cylinder).
Functional description and purpose of the technical equipment
The PÖTTINGER NOVADISC 302 is a rear-mounted, Category II three-point linkage disc mower without conditioner, designed for mowing grass and green forage on grasslands and forage crops. Drive from the tractor's PTO (standard 540 rpm) is transferred
via a gearbox and belts to the welded, low cutter bar with 7 discs (2 knives per disc). The flat cutter bar and spring suspension ensure good ground following and
a clean cut with low power requirements; a mechanical overrun safety device
allows the cutter bar to tilt back in the event of a collision with an obstacle,
reducing the risk of damage. The machine folds into a vertical transport position and
is compatible with tractors from approximately 60 HP. Typical use: mowing meadows/pastures and haylage, solo or in combination with a 3.0–3.5 m front mower to increase the working width.
Technical condition description
Name plate:
- Location – center hitch arm,
- Tampering/irregularities – none.
Identification number stamped:
- Location – not found,
- Tampering/irregularities – none.
Technical documentation:
- Operator's manual – No,
- Parts catalog – No,
- Technical specifications – none,
CE/EC certificate:
- Marking – Yes, on the plate.
- Declaration/certificate of conformity – No.
Operational history:
- Service documentation – no.
- Periodic inspection markings – none.
Year of manufacture:
- 2022 – determined based on the permanently affixed markings on the nameplate located above the nameplate.
Technical condition:
- Visual condition – good, minor mechanical damage throughout.
• Yellow curtains/covers: numerous dents, creases, and abrasions, minor cracks at the corners; cuts in places (visible scratches/notches on the canvas).
• Drive unit cover (red): crack in the upper cover near the handle.
• Frame and beam paintwork: typical abrasions, scratches, and impacts from mowing/transportation.
• No signs of hydraulic leaks.
- Wear – no precise verification possible – the device has not been tested in operation. • Visible wear and tear on the discs and sliding plates; typical of several seasons of operation.
• Knives: some knives are visibly worn, with missing knives (only one is visible on some discs, and none at all on others).
• Disc cones/hoods: dents/dents, no obvious cracks.
• Skids (skids) – visible wear, thickness assessment required; replacement of the outermost skids may be necessary.
- Working system – no operational test of the working units was performed.
• Cutterbar: impact marks on the outermost modules and covers; requires checking the straightness and clearance of the modules. Discs are not locked, they rotate when turned manually. Swath guide vanes are bent.
• Inability to verify cutterbar tightness due to contamination. - Three-point hitch mounting system
• Significant wear (ovalization) of the hole in one of the three-point hitch mounting brackets.
• Parking stand complete and visually functional.
• Load relief spring – complete, no cracks shown in photos.
• Lifting hinge/cylinder – present; no leaks, not tested in operation.
- Missing:
• PTO shaft.
• Quick-change knife key, spare knives, documentation. |
