Brand, model: SINOBOOM AB22EJ Plus (AB710EJ)
Type of equipment: Aerial work platform
Serial number: 0300900431
Year of manufacture: 2023
Mileage: 244 hours
General specifications:
• Operating weight: 10,900 kg
• Travel speed (max): 4.8 km/h
• Drive: electric
• Power supply: battery
Engine/Drive System:
• Engine Type: Direct Current (DC) Electric Motor
• Batteries: 2 x 24V, 480 Ah
• Battery Voltage: 48V DC
• Control Voltage: 12V DC
• Hydraulic Tank Capacity: 130
Capacity:
• Capacity (restricted reach): 3
• Basket load capacity (restricted reach): 454 kg – 340 kg
• Tower rotation range: 360° continuous
• Overhang during tower rotation: 0.84 m
• Basket rotation range: 180°
• Maximum speed in transport position: 4.8 km/h
• Maximum speed in working position: 1.1 km/h
• Turning radius (inside / outside): 2.40 m / 5.55 m
• Maximum terrain slope: 5°
• Lateral force (restricted reach): 600 N
• Maximum permissible wind speed: 12.5 m/s
Safety Systems:
• Tilt Protection System
• Emergency Lowering System
• Emergency Stop System
• Work Platform Weighing System
• Fault Diagnostic System
Standard manufacturer's equipment:
• Hydraulic basket leveling
• 180° hydraulic basket rotation
• Direction control
• 360° turret rotation with follow-up
• Alarm signal and buzzer
• Warning light
• Basket overload detection system
• Display
• Fault diagnosis system
• Emergency stop system
• Emergency lowering with auxiliary power
• Tilt angle up to 5°
• Non-marking foam-filled tires
• Emergency wheel brake release
• 4WD / 2WS
• 2.44 m (8'1") basket width
• Lead-acid traction batteries
Dimensions and working range:
• Maximum basket height: 21.60 m
• Maximum working height: 23.60 m
• Maximum lateral outreach: 13.40 m
• Maximum ground clearance under the articulation: 8.90 m
• Drive-through/transport length: 9.95 m / 7.73 m
• Drive-through/transport width: 2.49 m / 2.49 m
• Drive-through/transport height: 2.68 m / 2.95 m
• Wheelbase: 2.49 m
• Ground clearance: 0.39 m
Other details:
• Electrical protection class: IP54
• Standard: EN 280:2013 + A1:2015
• Machine not electrically insulated
Additional equipment:
• Solid tires
• Power socket on the work platform
Technical Condition Description
Nameplate:
- Location – rear part of the frame.
- Tampering/Irregularities – None,
Identification Number Stamped:
- Location – Not located.
Technical Documentation:
- User Manual – None,
- Parts Catalog – None,
- Technical Specifications – None,
CE/EC Certificate:
- Marking – Yes,
- Declaration/Certificate of Conformity – Yes.
Operation History:
- Service Documentation – Yes – Maintenance Log,
- Periodic Inspection Markings – Yes,
- UDT Inspections – Yes, Next Inspection Date: 07.2026, No Inspection Booklet
Provided.
Year of Manufacture:
- 2023 - Determined based on permanently applied markings on the factory nameplate.
Technical condition:
- Visual appearance – good, with signs of use, corrosion, scratches and scuffs on frame, housing, and basket components.
- Wear – increased relative to age and mileage.
- Electrical system and batteries – complete electrical system, powered by a set of 48V traction batteries. Visible wear and tear and local damage to the insulation of the signal wires at the connectors.
- Running gear – solid Blacksmith tires, size 355/55 D625 NHS; tires with visible signs of mechanical damage, local cracks, and tread material loss.
- No-load drive test – conducted; no irregularities in the operation of the running gear or drive system were found during the test.
- Hydraulic and working systems – tested in operation without a load; no visible fluid leaks were found during the inspection. Working arm with surface scratches, local paint chips, and corrosion spots.
- On-board computer readings – no active error messages or warning signals were detected during the inspection; the display system functioned properly.
- Machine parts with visible damage:
• Bodywork: turret outer skins – numerous scratches, paint abrasions, local paint chips, and local corrosion spots.
• Outer frame: local paint damage around corners and structural edges.
• Work basket: dent in the front section, visible signs of wear in the form of scratches on steel components.
• Control console (in the basket): visible signs of wear, soiling from use, abrasions to the function markings on the buttons.
• Electrical system conduits: local abrasions and damage to the protective covers of the cables around the hydraulic unit and electrical connections. • Top frame cover – dented at the front,
• Turret side covers – scratched, with dents at the rear,
• Boom arm – scratched with corrosion at the rear. |
