| Informations complémentaires | General information:
Brand, model: WACKER NEUSON ET18 (E12-02)
Type of equipment: Crawler mini excavator
Serial number: WNCE1202APAL04076
Year of manufacture: 2018
Mileage: 4,642.5 hours
Technical specifications of the item:
Operating weight 2,117 kg
Transport weight 1,974 kg
Travel speed 2.5 – 4.3 km/h
Digging force – arm / bucket: 11,200 / 18,800 N
Slewing speed: 10 rpm
Engine:
Model: YANMAR 3TNV76 - S
ISO engine power: 13.7 kW / 2,200 rpm
Type: diesel
Displacement: 1,116 cm³
Number of cylinders: 3
Undercarriage:
Track width: 230 mm
Overall machine width: 990 – 1,300 mm (hydraulically adjusted)
Hydraulic system:
Pump capacity: 73 l/min
Operating pressure: 200 bar
Tank capacity: 19 l
System capacity: 33 l
Dimensions:
Total length: 3,854 mm
Total width: 990 mm - 1,300 mm
Total height: 2,392 mm (with cab)
Ground clearance: 210 mm
Equipment:
- VDS system (cab tilt up to 15°)
- Rubber tracks,
- Folding blade,
- Full cab with heating,
- Radio-ready,
- Additional hydraulic outlet on the arm,
- Quick coupler
Technical Condition Description
Nameplate:
- Location – front frame.
- Tampering/irregularities – missing.
Identification Number:
- Location – not located.
Technical Documentation:
- User Manual – missing.
- Parts Catalog – missing.
- Technical Specifications – missing.
CE/EC Certificate:
Marking – yes, on the nameplate,
- Declaration/Certificate of Conformity – none,
- Engine – as indicated on the engine nameplate – meets the Chinese standard CN FC G3 00 0970000075 000001 – China Stage III, no markings on the plate
meeting European standards.
Technical condition:
- Visual
condition: satisfactory,
- Wear:
directly proportional to age and mileage.
- The engine was started, and the engine operated correctly within the tested range. No damage or significant leaks were found.
- The running gear:
no visible defects; a test run of the running gear was performed without a load. The tracks had cracks and material loss. The track bogie frame was significantly scratched and had corrosion spots. The cab tilt pin bolt was missing.
- The working gear:
a test run of the working gear was performed without a load; no irregularities were found, and play was consistent with mileage. The arm was scratched with chips and corrosion spots. Minor mechanical damage and paintwork damage to the cylinders. The lower arm cylinder hydraulic hose was bent.
Damaged machine parts requiring repair/replacement:
Body:
- outer frame – scratched, chipped, corrosion spots,
- lower left cover – scratched, chipped, corrosion spots,
- counterweight – scratched, chipped, corrosion spots,
- upper windshield – cracked,
- radio antenna – torn from its mountings, incomplete,
- cab side covers – chipped, scratched,
- windshield frame – corrosion spots.
Cab:
- right door lock cover – broken,
- seat – worn, dirty,
- right joystick – missing the outer part of the upper button.
- rear inner cover – cracked,
Deficiencies:
- arm work lamp,
- radio antenna mast,
- exterior mirrors with arms,
- left door lock,
- lower arm actuator cover,
- left door lock inner cover. |
