AccueilConstructionJLG - Toucan 12e Plus (NEW)

JLG - Toucan 12e Plus (NEW)

  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
  • thumbnail
1 de 10

Informations de base

TypeLevage vertical
MarqueJLG
ModèleToucan 12e Plus (NEW)
Numéro de sérieA300060912
Année de fabrication2021
LocalisationGrójec, Poland

Informations complémentaires

Informations complémentaires

Machine Type: Mast Lift (Aerial Work Platform)
Make, Model: JLG TOUCAN 12E PLUS
Year of Manufacture: 2021
Serial Number: A300060912
Operating Hours: 747
Manufacturer: JLG France SAS
Imp. Guillaume Mon Amy, 47400 Fauillet, France

Platform height - folded: 350 mm
Total machine height when folded: 1,990 mm
Total machine width: 1,200 mm
Total machine length: 3,650 mm
Platform size - length: 700 mm
Platform size - width: 1,050 mm
Maximum travel speed: 5.5 km/h / 0.75 km/h

Maximum slope: 3°

Load capacity (working load): 200 kg

Maximum horizontal lateral manual force: 400 N
Maximum wind speed during operation: 45 km/h (12.5 m/s)
Inner turning radius: 750 mm
Outer turning radius: 2,600 mm
Maximum platform height: 10,650 mm
Horizontal reach:
from the device axis: 5,550 mm
from the rear edge of the wheel: 4,520 mm
from the side edge of the wheel: 4,950 mm
Working area: 6,950 mm
Next UDT inspection date: September 2025

The machine's visual condition is good.

Minor operational damage is visible throughout the machine, resulting from the nature and intensity of use.

The control panel is protected from weather conditions.
The electric motor has been started and is operating correctly.
A test of the mast lift's drive and operating components was performed under visual inspection conditions (without load) - no abnormalities were found.
No oil leaks were detected from the hydraulic system.
The visual condition of the lift's hydraulic cylinder piston rods is satisfactory.
The machine is partially covered with company advertising.
The machine's counterweight is scratched and has chipped paint.
The left plastic side cover is cracked.
The work basket's safety rails are worn.

TECHNICAL DESCRIPTION
Operator's station - standing,
Basic equipment - complete
Engine - electric
Hydraulic systems
(pump, hoses, actuators) - no comments
Paintwork - orange with signs of mechanical damage
Dashboard - complete
Fluid leaks - none noted
Machine repair and maintenance - not presented
Machine identification documents - presented
Machine mileage documents - not presented
Unit operation test without load - performed
Basic components

ENGINE
Engine and accessories without visible defects or mechanical damage.
Engine started - engine operation is satisfactory.

CHASSIS
Chassis components are complete with no visible defects.

Minor operational damage – scratches, corrosion spots on the lower part of the machine body.

Cracked tires.

BODY
Orange body with signs of mechanical damage from use.

Body partially covered with company advertising.

The following damage was found:
- Counterweight – scratched, paint chipping,
- Left plastic side cover – cracked,
- Basket rails – paintwork worn.

Equipment
One ignition key was provided for inspection.
The machine is standardly equipped with:
- Work platform, - Control panel,
- Electric drive system, - Overload sensor,
- Hour meter, - Solid tires (cast, non-marking),
- Sound and light signals.

Disponible maintenant

Demander un prix

image of contact person
Andrzej Burski
Localisation
Grójec, Poland
Type d'enchère