| Informations complémentaires | Brand, model: AGROLA 1000 K6 (P 161/2)
Type of equipment: Sprayer
Serial number: 21117
Year of manufacture: 2021
Mileage: No odometer
Technical specifications of the quoted item:
Tank assembly
• Main tank capacity: 1000 l
• Material/layout: polyethylene, three-piece (main tank + sprayer rinsing water + handwashing water).
Fan attachment (K6)
• Type: axial, reverse draft, deflector column, Ø 800 mm
• Max. air flow rate: 30,000 m³/h
• Gear ratios: 2 + N
• Spraying range: up to 3 m vertically / up to 5 m horizontally.
Liquid pump
• Standard: Annovi&Reverberi AR1203 – 116 l/min, max. 50 bar
• Max. permissible pressure in the sprayer liquid system: 20 bar.
Spraying System
• Brass spray heads with anti-drip valve.
• Number of spray heads: 2×6 (6 per side).
• Standard version – multi-nozzle spray heads (2 nozzles); in the "economic spraying" variant – single nozzles.
Body and Hitch
• Hot-dip galvanized steel frame.
• Hitch: straight drawbar (optional: steerable drawbar).
Wheels
• Standard: 10.0/75-15.3;
Electrical System
• LED Road Lighting
Operating Parameters (selected)
• Max. PTO speed: 540 rpm
• Max. transport speed: 15 km/h
• Power requirement (for 1000 K6): 30–40 HP.
Dimensions and Weights (1000 K6)
• Length: 3870 mm
• Width: min. 1260 mm
• Height: approx. 1910–2030 mm (depending on tires/equipment)
• Curb weight: 710 kg
• Gross weight: 1910 kg
Controls/Equipment
• ARAG solenoid valves (no control panel)
• PTO shaft
• Steering drawbar
Technical Condition Description
Nameplate:
- Location – frame behind the drawbar,
- Tampering/irregularities – none.
Identification Number Stamped:
- Location – not located,
- Tampering/irregularities – none.
Technical Documentation:
- User Manual – No,
- Parts Catalog – No,
- Technical Specifications – none,
CE/EC Certificate:
- Marking – Yes,
- Declaration/Certificate of Conformity – No.
Operation History:
- Service Documentation – No.
- Periodic Inspection Markings – none.
Year of Manufacture:
- 2021 – determined based on permanently applied markings on the factory nameplate.
Technical condition:
- Visual appearance – good, minor mechanical damage throughout.
- Wear – unable to verify – device not tested in operation.
- Operating system – no operational test of the operating units was performed. Ball valve handles
are corroded, plastic handle covers are cracked; traces of
temporary hose seals at the suction filter are present.
- Liquid pump – oil level below the minimum, risk of the pump being operated without
proper lubrication – the pump's technical condition requires verification in service conditions.
- Control – the sprayer is equipped with ARAG liquid control solenoid valves for use with a manual control panel – control panels are not included with the sprayers. - Chassis – complete chassis components with no visible defects, minor mechanical damage, rear protection beam – scratched with corrosion,
- Tires – BKT IMPLEMENT -AW909 10.0/75-15.3 – 30% wear |
