Información adicional | Machine Type: Scissor Lift Make: JLG 2032ES Year of Manufacture: 2021 Serial Number: 1200035664 Operating Hours: 209 Manufacturer: JLG EMEA BV Polarisavenue 63, 2132 JH Hoofddorp, Netherlands
Machine specifications: Platform height - raised 6,000 mm Platform height - folded 1,100 mm Working height 7,900 mm Overall machine height in stowed position 2,200 mm / 1,800 mm (rails extended / folded) Overall machine width 810 mm Overall machine length 2,300 mm / 3,200 mm (deck retracted / extended) Platform length 2,300 mm Platform width 800 mm Platform extension length 900 mm Wheelbase 1,880 mm Travel speed 4.4 km/h Outside turning radius 2,060 mm Maximum grade 1.5 / 3° Load capacity 360 kg Gross weight 2,004 kg The next UDT inspection is scheduled for October 2025.
SEPEX 24V DC drive motor
Power: 0.65 HP at 3,750 rpm
Hydraulic pump assembly: 24 V DC, 3 kW
The machine's visual condition is good. There are numerous operational damages visible throughout the machine, resulting from the nature and intensity of use. The deck, handrails, moving parts of the lift, and bottom covers are scratched. The electric motor has been started and is operating correctly. A test of the running and working parts of the scissor lift was performed under visual inspection conditions (without load). No oil leaks were detected from the hydraulic system. The visual condition of the lift's hydraulic cylinder piston rods is satisfactory. The machine is partially covered with company advertising.
TECHNICAL DESCRIPTION Operator's station - standing, Basic equipment - complete Engine - electric Hydraulic systems (pump, hoses, actuators) - no comments Paintwork - orange with signs of mechanical damage Dashboard - complete Fluid leaks - none noted Machine repair and maintenance - not presented Machine identification documents - presented Machine mileage documents - not presented Unit operation test without load - performed Basic components:
ENGINE Engine and accessories without visible defects or mechanical damage. Engine started - engine operation is satisfactory.
CHASSIS Chassis components are complete with no visible defects. Numerous operational damages – scratches, corrosion spots on the lower part of the machine body. Cast tires, solid
B O D Y The body is orange with signs of mechanical damage from use. The body is partially covered with company advertising. The following damage was found:
- platform – scratched, corrosion spots, - lower housings – scratched.
E Q U I P I E N T I O N One ignition key was presented for inspection. The machine is equipped with: - safety barriers, - self-closing entrance gate, - overload sensor, - STOP button, - tilt detection system, - sound and light signals. - cast tires (solid), - electric drive |