Technical parameters
Name Telescopic handler
Model TF33.9-120
Year of manufacture 2016 (based on the nameplate)
Machine identification number ZF1F50TA7C6000566 (based on the nameplate)
Manufacturer MERLO S.p.A. Italy
Operating hour meter (hours) 3148 (read)
Engine DEUTZ TCD 3.6 L, serial number 11712572, year of manufacture 2014 (based on the nameplate)
Engine power (kW) 90
Fuel Diesel
4x4 drive
Maximum lifting capacity (kg) 3300
Maximum lifting height (m) 8.6
Telescopic boom
Own weight without attachments (kg) 6950
Transport dimensions without attachments (L/W/H) (mm) 4315/2240/2240
Maximum speed (km/h) 40
Color: Green
Main equipment:
Air conditioning.
Joystick control.
SONY DSX-A200UI radio.
Beacon.
2 work lights on the front of the cab roof.
2 work lights on the rear of the cab roof. 2 boom work lights.
Road lights.
Transport hitch.
Rearview mirrors.
Transport hitch mirror.
Rear electrical outlet, rear hydraulic connections.
Attachment carriage (no nameplate).
Pallet forks (no nameplate, manufacturer markings).
Bucket ~2300 mm (no nameplate, manufacturer markings). Description of the installed tires:
Wheel Brand, Type Tread Depth mm
I Axle L Michelin XMCL 460/70 R24 IND 159 A8 24
I Axle R Michelin XMCL 460/70 R24 IND 159 A8 24
II Axle L Michelin XMCL 460/70 R24 IND 159 A8 25
II Axle R Michelin XMCL 460/70 R24 IND 159 A8 25
Description of technical condition.
Overall visual technical condition: average.
Inspection was carried out at the post-lease equipment yard.
▪ The charger was started after being connected to an external power source. Due to faulty batteries, a test run with the work attachment was performed. The following findings were observed during the operational test:
1. Engine – operating properly within the tested speed range, no visible leaks or operating fluids were found in the engine compartment.
2. Gearbox – operating properly within the tested gear ratio range.
3. Braking system – operating properly.
4. Steering system – operating properly.
5. The boom assembly was checked for proper operation within the range of telescopic segment movements.
- no functional irregularities were found.
6. Hydraulic system: within the tested range, no functional irregularities were found.
No visible leaks or leaks were found.
Fuel level: reserve.
▪ Visible operational contamination, scratches and abrasions on the surface, numerous paintwork defects, rust deposits, and corrosion.
Fenders are scratched, and the PL fender is damaged and cracked. The road lamp cover is damaged and dented.
The engine compartment cover is deformed and has numerous damages.
The rear and front hitches are missing pins.
Wheel discs – paint chips, rust deposits.
Tires – tread wear and tear.
▪ Operator's cab.
Operational contamination was detected inside the cab.
A message indicating the need for periodic service was active on the monitor.
Cracks were detected in the right housing panel lining.
Air conditioning is inoperative – the system does not activate during the start-up attempt; further service verification is required.
▪ UDT inspection valid until February 2026 – as indicated by the sticker on the operator's cab, no UDT documentation. ▪ Technical documentation provided: loader user manual, spare parts catalog, engine user manual, CE Declaration of Conformity, no maintenance booklet.
▪ CE marking: Yes.
▪ Number of ignition keys (pcs): 1.
▪ No information on inspections, repairs, or operating conditions.
▪ The loader does not have a service report. Before further use, it requires necessary repairs, maintenance, and service to check the functionality and wear of components and to detect any possible component defects. |
