| Zusatzinformation | General data:
Brand: WACKER NEUSON ET18 (E12-02)
Type: Mini excavator, crawler
Serial number: WNCE1202TPAL04070
Year of manufacture: 2018
Mileage: 2,950 hours
Technical specifications of the valuation item:
Operating weight: 2,117 kg
Transport weight: 1,974 kg
Travel speed: 2.5 – 4.3 km/h
Digging force – arm / bucket: 11,200 / 18,800 N
Slewing speed: 10 rpm
Engine:
Model: YANMAR 3TNV76 - S
ISO engine power: 13.7 kW / 2,200 rpm
Type: diesel
Displacement: 1,116 cm³
Number of cylinders: 3
Undercarriage:
Track width: 230 mm
Overall machine width: 990 – 1,300 mm (hydraulically adjusted)
Hydraulic system:
Pump capacity: 73 l/min
Working pressure: 200 bar
Tank capacity: 19 l
System capacity: 33 l
Dimensions:
Total length: 3,854 mm
Total width: 990 mm - 1,300 mm
Total height: 2,392 mm (with cab)
Ground clearance: 210 mm
Equipment:
- VDS system (cab tilt up to 15°)
- Rubber tracks,
- Folding blade,
- Full cab with heating,
- Radio,
- Additional hydraulic outlet on the arm,
- Digging bucket, approx. 280 mm wide,
- Quick coupler.
Technical Condition Description
Nameplate:
- Location – front frame.
- Tampering/irregularities – missing.
Identification Number:
- Location – not located.
Technical Documentation:
- User Manual – missing.
- Parts Catalog – missing.
- Technical Specifications – missing.
CE/EC Certificate:
- Marking – yes, on the nameplate,
- Declaration/Certificate of Conformity – none,
- Engine – as indicated on the nameplate – meets the Chinese standard CN FC G3 00 0970000075 000001 – China Stage III, no markings on the nameplate indicating compliance with European standards.
Operation history:
- Service documentation – Inspection booklet – none.
- Periodic inspection markings – marked on the inside of the engine compartment cover – "h 1949 19/06/2023", impossible to determine what the record refers to.
- On-board computer readings – service interval exceeded by 501 hours.
Technical condition:
- Visual – satisfactory,
- Wear – emergency,
- Engine started, engine operation within the tested range was normal. No damage or excessive leaks were found.
- Drive system – no visible defects; a test run of the drive systems was performed without a load. Tracks with cracks and material loss. The left track with a significant tear – requiring replacement. The track frame was significantly scratched with corrosion.
- Working system – a test run of the working systems was performed without a load – irregularities were found, the excavator arm lowers automatically – both during operation and with the engine off – the technical condition of the hydraulic system needs to be verified in service conditions. The arm is scratched with chips and corrosion. Cylinders with minor mechanical damage. Blade with dents. - Damaged machine parts requiring repair/replacement:
Body:
- outer frame – scratched, chipped, corrosion spots,
- engine compartment cover – scratched, dented and missing,
- right cab window – cracked and missing,
- radio antenna – torn from its mountings, incomplete,
- cab side covers – chipped, scratched,
- windshield frame – corrosion spots,
- auxiliary handles – bent, corrosion spots,
- counterweight – scratched, corrosion spots,
- left door lock – broken from its mountings,
- right door – window seal partially torn,
Cab:
- radio – does not turn on,
- Air vents – broken and missing,
- Door lock cover – broken,
- Left joystick – missing the outer part of the upper button,
- Right joystick – missing the outer part of the upper button,
- Upper glass, roof – cracked.
Missing parts:
- Radio antenna mast,
- Exterior mirrors with arms,
- Lower arm actuator cover. |
