| Zusatzinformation | MASSEY FERGUSON S 8735
Agricultural tractor
Serial number VKKMY47GTPB327025
Year of manufacture / model year 11-2023
Mileage read 16.3 mth
Technical data of the valuation subject:
Engine
• Manufacturer and type: AGCO Power, 6-cylinder, 8.4 liters, turbocharged with
SCR (Selective Catalytic Reduction) 3rd generation technology.
• Rated power: 350 hp at 1950 rpm.
• Maximum power with EPM (Engine Power Management): Up to 385 hp
(power increase depending on load and speed).
• Maximum torque: About 1500 Nm at 1500 rpm.
• Displacement: 8400 cm³.
• Emission standard: Stage V (compliant with European requirements for 2023).
• Fuel consumption: Optimized thanks to low revs and EGR system
(external exhaust gas recirculation), reduction of approx. 10% compared to
older models.
• Fuel tank capacity: 630 litres + 60 litres for AdBlue.
Transmission
• Type: Dyna-VT (continuously variable transmission).
Speed range: From 0.03 km/h to 40 km/h (optionally up to 50 km/h depending on
market and homologation).
• Operation: Multipad joystick or T-lever, two speed ranges
for precise matching of engine speed and road speed.
Hydraulic system
• Pump capacity: 205 l/min (Load Sensing system).
• Maximum rear linkage lift capacity: 12,000 kg.
• Maximum front linkage lift capacity (optional): 5000 kg.
• Number of hydraulic outlets: Up to 6 pairs at the rear (with decompression system) + 2 at the front (Power Beyond optional).
• Controls: Electronic from the armrest.
• System capacity: Approx. 110 l
Power take-off (PTO)
• Speeds: 540/540E/1000/1000E rpm.
• Transmitted power: Full engine power available at the PTO thanks to the optimisation of the
transmission.
Dimensions and weight
• Length: Approx. 5550 mm (depending on configuration).
• Width: Approx. 2550 mm (depending on tyres).
• Height: Approx. 3370 mm (with cab).
• Wheelbase: 3100 mm.
• Unladen weight: Approx. 10,500 kg (without ballast, depending on equipment).
• Permissible gross vehicle weight: Up to 18,000 kg.
Cab and comfort
• Noise level: 68 dB.
• Equipment: Suspended cab, suspended front axle, digital
MF vDisplay, armrest with intuitive controls,
360° visibility.
• Air conditioning: Standard, with multi-zone control.
Tyres (example)
• Front: 600/65 R34.
• Rear: 710/75 R42.
• Tire wear: 10%
Equipment:
- Front three-point linkage with 2 pairs of hydraulic outlets,
- Front axle with suspension,
- Air conditioning / cabin heating,
- Front ballast 349 kg,
- Rear axle ballasts 250 kg x 4 pcs.
Description of operation, purpose of the technical means
The Massey Ferguson 8735 S agricultural tractor from the 8700 S series is a machine designed for
heavy and demanding agricultural work on large farms. Its
main purpose includes:
Cultivation: Work with heavy tillage machines, such as multi-furrow
ploughs, tillage units, cultivators or deep soil
looseners.
2. Sowing and planting: Cooperation with precise precision seeders or
planting machines, supported by GPS technology. 3. Harvesting: Support in the transport of crops (e.g. with trailers with a high load capacity)
and work with baling or loading machines.
4. Transport work: The tractor is suitable for transporting heavy loads
thanks to its high power and permissible total weight of up to 18,000 kg.
5. Specialist tasks: Thanks to the advanced hydraulic system and
PTO (power take-off shaft), it can operate machines requiring a high
oil flow, e.g. hydraulic presses, front loaders or manure spreaders.
6. Precision farming: Equipped with technologies such as MF Guide
(automatic guidance) and Datatronic 5 (telemetry), it is ideal for
modern farms using solutions based on data and
work optimization.
It is a universal tractor, but especially recommended for large areas where
efficiency, power and operator comfort are important.
efficiency, power and operator comfort.
Description of the Massey Ferguson 8735 S tractor
Engine and drive
The heart of the tractor is the 6-cylinder AGCO Power engine with a capacity of 8.4 liters, generating
rated power of 350 HP, and with the EPM (Engine Power Management) system up to
385 HP at peak load moments. The engine uses SCR
(AdBlue) and EGR technology to reduce exhaust emissions, meeting the Stage V standard. Thanks to its low
revs (maximum torque at 1500 rpm), it ensures high
fuel efficiency and long service life.
The drive is transmitted by a continuously variable Dyna-VT transmission, which allows
smooth speed regulation from 0.03 km/h to 40 km/h (or 50 km/h in the version with
homologation). The operator controls the speed using the Multipad joystick, which allows
precise adjustment of the working pace to field conditions.
Hydraulic system
The tractor is equipped with an efficient Load Sensing hydraulic system with a
205 l/min pump. This system supplies oil only when needed, which
reduces energy losses. The rear linkage with a lifting capacity of 12,000 kg and the optional front
linkage (5,000 kg) allow for the operation of heavy machinery. Numerous hydraulic outlets
(5 pairs at the rear) allow simultaneous operation with many implements.
Power take-off shaft (PTO)
The PTO offers four speeds (540/540E/1000/1000E), which allows for flexible
adaptation to various machines. Full engine power is transferred to the PTO thanks to
the transmission optimization, making the tractor efficient in tasks requiring high energy,
such as baling or shredding. Cab and controls
The cab is one of the key elements - suspended, quiet (68 dB) and
equipped with an ergonomic armrest with Datatronic 5 screen. The operator has full control over the tractor's functions, from setting the hydraulics to monitoring
working parameters in real time. The MF Guide system with GPS provides
automatic guidance, which reduces fatigue and increases precision (e.g. when sowing).
Description of technical condition
Nameplate:
- Location - cabin frame, right side,
- Interference/irregularities - none.
Identification number stamped:
- Location - Machine frame in the right, front part,
- Interference/irregularities - none.
Technical documentation:
- User's manual - Yes,
- parts catalog - Yes,
- Technical specification - none,
CE/EC certificate:
- Marking - Yes,
- Declaration/certificate of conformity - Yes.
Operation history:
- Service documentation – yes – no entries.
- Periodic inspection markings – none.
Year of manufacture:
- 2023.11 - determined based on permanently applied markings on the factory nameplate.
Technical condition:
- Visual – very good, minor mechanical damage to the paintwork,
scratches.
- Wear – machine without signs of use.
- Engine and drive – engine started, engine operation within the tested range correct.
- Chassis – chassis elements complete without visible deficiencies or mechanical damage.
- Working system – a test drive was carried out with the tractor without load – no irregularities were found.
Other:
Two keys for the ignition switch and door locks are included with the machine. |
